SHAMROCK Communications (Pvt.) Ltd.

public relations, marketing services, publications, conferences, event management
Quote
-

Peter Drucker, 1909-2005

There is nothing so useless as doing efficiently that which should not be done at all."

SC Media Centre - Pakistan Plastic Manufacturers Association

PakPlastics Expo concludes after insightful deliberations & overwhelming response
The event was a resounding success over 60,000 visitors & 65 prestigious exhibitors


Karachi: March 27, 2016 - As the Pakistan Plastic show 2016 reached its conclusion in Lahore, after featuring numerous insightful sessions, technologies and strategic discussions. This highly informative event received tremendous response from the industry professionals, media and the general public. The grand closing ceremony was chaired by the Chief Executive Officer of the Engineering Development Board - Mr Tariq Ejaz Chaudhry. During the concluding ceremony, each exhibiting enterprise was presented with a commemorative shield.

The Exhibition was held at the Expo Centre in Lahore from the 25th to 27th of March 2016. It was orchestrated by the Pakistan Plastic Manufacturers Association (PPMA). It featured more than 65 local and international exhibitors, and was thronged by over 60,000 visitors in three days. The visitors included plastic industry professionals, businessmen, students, housewives and general public. The visitors showed deep interest in the displayed technologies, machinery and products, with special interest in the as On-the-Spot manufacturing of various plastic items could be seen at the exhibition including; buckets, screw drivers, Plastic Cans and plastic chairs of different sizes and capacity.

The Chief Organizer of PAKPLAS 2016 – Mr.Nabeel Hashmi stated that: “It was a delightful experience to see this grand event conclude on a successful and vibrant note, as it paved the way for fresh collective initiatives, and engaged all major stakeholders of the Plastics-Processing Industry. The participants’ profiles included all important segments of this industry like; Raw-material producers, processors, plastics machinery manufacturers, makers of moulds & dies, traders & importers/exporters of plastics raw Material and producers of finished & semi-finished goods, who had pleasant interactions for learning and sharing their ideas, that can accelerate progress in this industry.”

Mr. Khalil Ahmed – SVC of PPMA stated that; “The show turned out to be a resounding success, as the 65 participating companies deeply appreciated the arrangements and the great response from the visitors. These participants included; industrial buyers, experts, entrepreneurs, regulators, investors and professional delegates from international and local enterprises and institutions, who were able to expand their business relations and deliberate on collaborative ventures to enrich this important sector of the economy. The experts from the renowned Bin-Rasheed Group conducted numerous insightful technical seminars where the professional participants took a deep interest, as the sessions provided technology updates and authentic knowledge.

The Patron in cheif PPMA and former President FPCCI – Mr. Usman Zakria commented that: “It was thrilling to see such enthusiastic participation from all key players of the industry and the general masses. The show also featured numerous informative sessions to highlight the productivity, capabilities, evolving trends and export potential of this essential sector of the economy.”

Mr. Tariq Ejaz Chaudhry, CEO of Engineering Development Board expressed his views and said that “ I am delighted to see that PAKPLAS has received overwhelming response from industry stakeholders, buyers & consumers and Appreciated the efforts of PPMA to organise such a wonderful and informative event he further said that PAKPLAS is the best platform for B2B meeting.

The PAKPLAS enjoys extensive support from the leading enterprises and associations operating in this sector. Some of the prominent participants include; Haitan, Haixning, Tederic, Aibim, Tongda, FCS, Shini, Mega, SML, Sunny, Bin-Rasheed, Euro Gulf, Indus Pencil, Dollar, Klass, Agha Plastic, King products, Combine Group, Plastifoam, Thermosole, Demag Plastic Group, Master, Sonex, Super Asia, Citizen, Boss, Toyo, Venus, Sonica, Al-Munawar, Tariq CLARIANT, K Group of Companies, Elegant marbles & Granite Industries, Popular Pipes, Royal Gold, IN Rehan Can.

The PPMA is a vibrant association committed to enhance cooperation, strengthen and promote the plastics processing industry in Pakistan, while it strives to raise the operational standards and quality of its products. The PPMA has created the PAKPLAS exhibition as a resourceful platform, which promises to develop stronger bonds among the key players and provide easier access to the national and international markets. This insightful show will also highlight the contributions of the Plastics Technologies Centre and other Polymer Technical Institutes.

PakPlastics Expo continues to attract large crowds on the 2nd Day
Over 60,000 visitors are expected to see more than 65 local & international exhibitors


Karachi: March 26, 2016 - As the Pakistan Plastic show 2016 entered its 2nd Day, large crowds continued to gather and seek valuable information and knowledge. The grand event being held at the Expo Centre in Lahore will continue from the 25th to 27th of March 2016. This mega-event is orchestrated by the Pakistan Plastic Manufacturers Association (PPMA), and has received an overwhelming response from more than 65 local and international exhibitors, as it is expected to attract over 60,000 visitors in three days.

Khalil Ahmed SV President PPMA expressed his views and said that the plastic industry experts conducted numerous insightful training sessions where the thousands of professional participants were provided with technology updates and authentic knowledge, as more and more crowds continued to throng the exhibition. The show also featured numerous informative sessions to highlight the productivity, capabilities, evolving trends and export potential of this sector.

Almost 65 companies functioning in diverse, yet relevant sectors have expressed interest in participating in the exhibition. These include; industrial buyers, experts, entrepreneurs, regulators, investors and professional delegates from international and local enterprises and institutions, who seek new opportunities for expanding their business relations and deliberate on collaborative ventures to enrich this important sector of the economy.

The Chief Organizer of PAKPLAS – Mr.Nabeel stated that: “This grand event is designed to facilitate collective initiatives by engaging the stakeholders of the Plastics-Processing Industry, whereby all segments of this industry like; Raw-material producers, processors, plastics machinery manufacturers, makers of moulds & dies, traders & importers/exporters of plastics raw Material and producers of finished & semi-finished goods, will get to interact, learn and share their ideas to accelerate progress in this industry.”

The PAKPLAS enjoys extensive support from the leading enterprises and associations operating in this sector. Some of the prominent participants include; Haitan, Haixning, Tederic, Aibim, Tongda, FCS, Shini, Mega, SML, Sunny, Bin-Rasheed, Euro Gulf, Indus Pencil, Dollar, Klass, Agha Plastic, King products, Combine Group, Plastifoam, Thermosole, Demag Plastic Group, Master, Sonex, Super Asia, Citizen, Boss, Toyo, Venus, Sonica, Al-Munawar, Tariq CLARIANT, K Group of Companies, Elegant marbles & Granite Industries, Popular Pipes, Royal Gold, IN Rehan Can.

The PPMA is a vibrant association committed to enhance cooperation, strengthen and promote the plastics processing industry in Pakistan, while it strives to raise the operational standards and quality of its products. The PPMA has created the PAKPLAS exhibition as a resourceful platform, which promises to develop stronger bonds among the key players and provide easier access to the national and international markets. This insightful show will also highlight the contributions of the Plastics Technologies Centre and other Polymer Technical Institutes.

PakPlastics Expo inaugurated in Lahore with tremendous fanfare
The international event will attract 100,000 visitors & over 150 exhibitors

Karachi: March 25, 2016 - The PAKPLAS Exhibition is Pakistan’s largest international show of Plastic Products and technologies, being held from 25th to 27th of March 2016, at the Lahore Expo Center. A grand inaugural ceremony was held to launch this mega-event orchestrated by the Pakistan Plastic Manufacturers Association (PPMA). The exhibition has received an overwhelming response from more than 150 local and international exhibitors, while it is expected to attract over 100,000 visitors in three days.

Senior Vice President of the Lahore Chamber of Commerce and Industries – Mr. Almas Hyder was the Chief Guest at the vibrant inaugural ceremony. He was accompanied by the President of PPMA along with the SVC, VC, Executive Committee and the organizing team of PAKPLAS. Other prominent personalities attending the ceremony included; Mr. Usman Zakria patron PAKPLAS , Mr. Nabeel Cheif organiser Pakplas , Mr. Ghaznavi,Mr Khalil Ahmed SV president PPMA and Mr. Zafar Saeed, along with numerous foreign exhibitors.
The Chief Guest of the ceremony – Mr. Almas Hyder stated that: “This progressive exhibition will inspire collective efforts by engaging all the key stakeholders, with enthusiastic participation from the industry, like; Raw-material producers, processors, plastics machinery manufacturers, makers of moulds & dies, traders & importers/exporters of plastics raw Material and producers of finished & semi-finished Goods. Every participant will get to interact, learn and share their ideas to accelerate growth.”

The Plastic Expo engages all the relevant entrepreneurs and investors on an international scale. The distinct feature of this show is; besides showcasing the offerings and achievements of Pakistan’s plastic industry, it will also feature numerous informative sessions to highlight the technological progress, capabilities, export potential and evolving trends in this sector. The participating companies include; industrial buyers, experts, entrepreneurs, regulators, investors and professional delegates from international and local enterprises and institutions, who seek new opportunities for expanding their business relations and deliberate on collaborative ventures to enrich this important sector of the economy.

The PAKPLAS enjoys extensive support from the leading enterprises and associations operating in this sector. Some of the prominent participants include; Haitan, Haixning, Tederic, Aibim, Tongda, FCS, Shini, Mega, SML, Sunny, Bin-Rasheed, Euro Gulf, Indus Pencil, Dollar, Klass, Agha Plastic, King products, Combine Group, Plastifoam, Thermosole, Demag Plastic Group, Master, Sonex, Super Asia, Citizen, Boss, Toyo, Venus, Sonica, Al-Munawar, Tariq CLARIANT, K Group of Companies, Elegant marbles & Granite Industries, Popular Pipes, Royal Gold, IN Rehan Can.

The PPMA is a vibrant association committed to enhance cooperation, strengthen and promote the plastics processing industry in Pakistan, while it strives to raise the operational standards and quality of its products. The PPMA has created the PAKPLAS exhibition as a resourceful platform, which promises to develop stronger bonds among the key players and provide easier access to the national and international markets. This insightful show will also highlight the contributions of the Plastics Technologies Centre and other Polymer Technical Institutes.